TP-Link TL-SL5428 - Radius-Server Auth-Port; Radius-Server Key

Authentication Commands
4-95
4
Command Mode
Global Configuration
Example
radius-server auth-port
This command sets the RADIUS server network port for authentication messages.
Use the no form to restore the default.
Syntax
radius-server auth-port port_number
no radius-server auth-port
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
181
Command Mode
Global Configuration
Example
radius-server key
This command sets the RADIUS encryption key. Use the no form to restore the
default.
Syntax
radius-server key key_string
no radius-server key
key_string - Encryption key used to authenticate logon access for client.
Do not use blank spaces in the string. (Maximum length: 20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#radius-server acct-port 181
Console(config)#
Console(config)#radius-server port 181
Console(config)#
Console(config)#radius-server key green
Console(config)#