EasyManua.ls Logo

TP-Link TL-SL5428 - Network Access - MAC Address Authentication; Network-Access Mode; Table 4-36 Network Access

TP-Link TL-SL5428
641 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Command Line Interface
4-120
4
Network Access MAC Address Authentication
The Network Access feature controls host access to the network by authenticating
its MAC address on the connected switch port. Traffic received from a specific MAC
address is forwarded by the switch only if the source MAC address is successfully
authenticated by a central RADIUS server. While authentication for a MAC address
is in progress, all traffic is blocked until authentication is completed. On successful
authentication, the RADIUS server may optionally assign VLAN settings for the
switch port.
network-access mode
Use this command to enable network access authentication on a port interface. Use
the no form of this command to disable network access authentication.
Syntax
[no] network-access mode mac-authentication
Table 4-36 Network Access
Command Function Mode Page
network-access mode Enables MAC authentication on an interface IC 4-120
network-access
max-mac-count
Sets a maximum for authenticated MAC addresses on an
interface
IC 4-121
mac-authentication
intrusion-action
Determines the port response when a connected host fails
MAC authentication.
IC 4-122
mac-authentication
max-mac-count
Sets a maximum for mac-authentication autenticated
MAC addresses on an interface
IC 4-122
network-access dynamic-qos Enables dynamic quality of service feature IC 4-123
network-access
dynamic-vlan
Enables dynamic VLAN assignment from a RADIUS
server
IC 4-123
network-access guest-vlan Specifies the guest VLAN IC 4-124
network-access
link-detection
Enables the link detection feature IC 4-124
network-access
link-detection link-down
Configures the link detection feature to detect and act
upon link down events
IC 4-124
network-access
link-detection link-up
Configures the link detection feature to detect and act
upon link up events
IC 4-124
network-access
link-detection link-up-down
Configures the link detection feature to detect and act
upon both link-up and link-down events
IC 4-124
mac-authentication
reauth-time
Sets the time period after which a connected MAC
address must be re-authenticated
GC 4-126
clear network-access Clears authenticated MAC addresses from the address
table
PE 4-127
show network-access Displays the MAC authentication settings for port
interfaces
PE 4-127
show network-access
mac-address-table
Displays information for entries in the secure MAC
address table
PE 4-128

Table of Contents

Other manuals for TP-Link TL-SL5428

Related product manuals