Authentication Commands
4-93
4
RADIUS Client
Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access to
RADIUS-aware devices on the network. An authentication server contains a
database of multiple user name/password pairs with associated privilege levels for
each user or group that require management access to a switch.
Table 4-31 RADIUS Client Commands
Command Function Mode Page
radius-server host Specifies the RADIUS server GC 4-94
radius-server acct-port Sets the RADIUS server network port GC 4-94
radius-server auth-port Sets the RADIUS server network port GC 4-95
radius-server key Sets the RADIUS encryption key GC 4-95
radius-server retransmit Sets the number of retries GC 4-96
radius-server timeout Sets the interval between sending authentication requests GC 4-96
show radius-server Shows the current RADIUS settings PE 4-96
To Next Page
