TP-Link TL-SL5428 - Web-Auth Re-Authenticate (IP); Web-Auth Re-Authenticate (Port)

Authentication Commands
4-135
4
Command Mode
Privileged Exec
Example
web-auth re-authenticate (Port)
This command ends all web authentication sessions connected to the port and
forces the users to re-authenticate.
Syntax
web-auth re-authenticate interface interface
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28/52)
Default Setting
None
Command Mode
Privileged Exec
Example
web-auth re-authenticate (IP)
This command ends the web authentication session associated with the designated
IP address and forces the user to re-authenticate.
Syntax
web-auth re-authenticate interface interface ip
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28/52)
• ip - IPv4 formatted IP address
Console#show web-auth interface eth 1/2
Web Auth Status : Enabled
Host Summary
IP address Web-Auth-State Remaining-Session-Time
--------------- -------------- ----------------------
Console#
Console#web-auth re-authenticate interface ethernet 1/2
Failed to reauth .
Console#