Simple Network Management Protocol
3-45
3
• Authentication Password – A minimum of eight plain text characters is required.
• Privacy – The encryption algorithm use for data privacy; only 56-bit DES is
currently available.
• Actions – Enables the user to be assigned to another SNMPv3 group.
Web – Click SNMP, SNMPv3, Users. Click New to configure a user name. In the
New User page, define a name and assign it to a group, then click Add to save the
configuration and return to the User Name list. To delete a user, check the box next
to the user name, then click Delete. To change the assigned group of a user, click
Change Group in the Actions column of the users table and select the new group.
Figure 3-29 Configuring SNMPv3 Users
To Next Page
Loading...
