Authentication Commands
4-131
4
fail-url - The URL to which a host is directed after a failed web
authentication attempt.
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command is not supported in the current release of the firmware.
Example
web-auth login-page-url
This command defines the external authentication page URL to which a host is
directed to complete web authentication. Use the no form to restore the default.
Syntax
web-auth login-page-url login-url
no web-auth login-page-url
login-url - The URL to which a host is forwarded to complete web
authentication.
Default Setting
Switch-generated login page
Command Mode
Global Configuration
Command Usage
This command is not supported in the current release of the firmware.
Example
web-auth login-success-page-url
This command defines the external URL to which a host is directed after a
successful web authentication attempt. Use the no form to restore the default.
Syntax
web-auth login-success-page-url success-url
no web-auth login-success-page-url
Console(config)#web-auth login-fail-page-url http://www.example.com/fail/
Console(config)#
Console(config)#web-auth login-page-url http://www.example.com/login/
Console(config)#
To Next Page
