iv
Repair and Service Manual
SAFETY INFORMATION
10002660
MAINTENANCE
ALWAYS:
• Replace damaged or missing warning, caution or information labels.
• Maintain the vehicle in accordance with the manufacturer’s periodic service schedule.
• Ensure that repairs are performed by trained and qualified persons.
• Follow the manufacturer’s maintenance procedures.
• Insulate any tools used within the battery area in order to prevent sparks or battery explosion.
• Check the polarity of each battery terminal and be sure to rewire the batteries correctly.
• Use specified replacement parts. Never use replacement parts of lesser quality.
• Use recommended tools.
• Determine that tools and procedures not specifically recommended by the manufacturer will not compromise the
safety of personnel, nor jeopardize the safe operation of the vehicle.
• Support the vehicle using wheel chocks and safety stands. Never get under a vehicle that is supported by a jack.
Lift the vehicle in accordance with the manufacturer’s instructions.
• Never attempt to maintain a vehicle in an area where exposed flame is present or persons are smoking.
• Be aware that a vehicle that is not performing as designed is a potential hazard and must not be operated.
• Test drive vehicle after repairs or maintenance in a safe area free of vehicular and pedestrian traffic.
• Keep complete records of the maintenance history of the vehicle.
VENTILATION
ALWAYS:
• Charge vehicle in a well ventilated area.
• Charge in an area free of flammable liquids and items.
• Charge a vehicle in an area that is free from flame or spark. Pay particular attention to natural gas or propane
gas water heaters and furnaces.
• Use a dedicated circuit for battery charger. Do not permit other appliances to be plugged into the receptacle
when the charger is in operation.
• Operate charger in accordance with manufacturers recommendations or applicable electrical code.
To Next Page
Loading...