B
FRONT CV SHAFT, SUSPENSION, AND STEERING
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
67
Repair and Service Manual
10002660
Counting threads or measuring thread distance are two
methods to equalize tie rod length.
Drive the vehicle to confirm that the steering wheel is cor-
rectly centered. If not, remove the steering wheel and
rotate it to the correct position.
Fig. 14 Wheel Alignment Front of Front Tires
Fig. 15 Wheel Alignment Rear of Front Tires
Item Torque Specification
52 36 - 40 ft. lbs. (48 - 54 Nm)
To Next Page
Loading...