TracVision TV3 - Page 52

TracVision TV3 User’s Guide
55
Satellite Settings
Figure 6-6 Edit Satellite Details
3. If the satellite is a custom user-defined satellite, you can change
the additional parameters listed below.
Figure 6-7 Additional Parameters for User-defined Satellite
NOTE: LNB type and local oscillator frequencies cannot be modified, as they
are properties of the LNB installed in the antenna.
Parameter Description
Satellite Name User-defined name (e.g., User Sat 1)
Region Africa, Asia, Australia/New Zealand,
Central/South America, Europe, or North
America
Orbital Slot
(Longitude)
Longitude of the satellite’s position, using the
following format: xxx.xxE or xxx.xxW
(leading zeros and decimal values are
optional)
Pre-Skew -90° to +90°