TracVision TV3 User’s Guide
88
Maintenance
Updating the Satellite Library
Service providers occasionally change the tracking parameters of their
satellites, necessitating an update to the data in the TracVision satellite
library. You can update your system’s satellite library to the latest
version at any time by downloading the file from KVH’s Update
server and uploading it to the TV-Hub. When you update the library,
the new version simply overwrites the previously installed version.
Use one of the following methods to update the satellite library:
Using an Onboard Network with Internet Access
If the TV-Hub is connected to an onboard network that has an Internet
connection, you can use that connection to download the library file.
Follow these steps:
1. Connect your computer to the same network as the TV-Hub.
2. At the Updates page of the web interface, select the satellite
library. Then select Download Update. This will download the
latest version of the library file onto your computer.
3. Select Install Update. Then navigate to and select the library
file (it has a .xml extension) saved on your computer. It will
only take a few seconds for the update to complete.
Using an iPhone/iPad
If you have an iPhone or iPad, and your device has an Internet
connection, you can use the TracVision TV/RV App to download the
latest library file and upload it to the system. You can download the
App for free from the Apple iTunes App Store.
Using a Computer with Internet Access
If your computer has an Internet connection, you can use that
connection to download the library file. Follow these steps:
1. Download the latest version of the library file onto your
computer from the KVH website (go to www.kvh.com/
Support/Product-Support-Library/Software-Updates).
Important!
With the exception of user-defined satellites, updating the satellite
library overwrites any changes you have made to the satellites’
tracking parameters. All parameters for preset satellites revert to their
factory default settings.
To Next Page
Loading...