© Copyright 2018 TRENDnet. All Rights Reserved.
PoE Web Smart Switch Series
Discovery List
This is the list where you can discover all the Web management devices in your network.
By pressing the “Discovery” button, you can list all the Web Smart Management
switches in the discovery list.
Double click or press the “Add to monitor list” button to select a device from the
Discovery List to the Monitor List.
System word definitions in the Discovery List:
MAC Address: Shows the device MAC Address.
IP Address: Shows the current IP address of the device.
Protocol version: Shows the version of the Utility protocol.
Product Name: Shows the device product name.
System Name: Shows the appointed device system name.
IP Mode: Shows the DHCP status of the device.
Location: Shows where the device is located.
Subnet Mask: Shows the Subnet Mask set of the device.
Gateway: Shows the Gateway set of the device.
Group Interval:
Monitor List
All the Web Smart switches in the Monitor List can be monitored; you can also receive
the trap and show the status of the device.
System word definitions in the Monitor List:
S: Shows the system symbol of the Web-Smart device, represent for device
system is not alive.
IP Address: Shows the current IP address of the device.
MAC Address: Shows the device MAC Address.
Protocol version: Shows the version of the Utility protocol.
Product Name: Shows the device product name.
System Name: Shows the appointed device system name.
IP Mode: Shows the DHCP status of the device.
Location: Shows where the device is located.
Subnet Mask: Shows the Subnet Mask set of the device.
Gateway: Shows the Gateway set of the device.
Group Interval:
Add Item: To add a device to the Monitor List manually, enter the IP Address of
the device that you want to monitor.
Delete Item: To delete the device in the Monitor List.
To Next Page
Loading...
Need help?
General