© Copyright 2018 TRENDnet. All Rights Reserved.
PoE Web Smart Switch Series
TPE-2840WS v2 Overview
Package Contents
In addition to your switch, the package includes:
Quick Installation Guide
CD-ROM (Utility & User’s Guide)
Power cord (1.8 m / 6 ft.)
Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TPE-2840WS Hardware Features
Front View
Rear View
Reset Button – Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
Mode Button – Press the mode button to change LED indicators to
display Link/Activity Mode, or PoE Mode.
PoE+ Gigabit Ports (1-24) – Connect network PoE+ or non-PoE devices.
Gigabit Ethernet Ports (25-28) – Connect network devices. Ports 25-28
are shared with SFP slots 25F-28F and are disabled when SFP slots (25F-
28F) are in use.
SFP Slots (25F-28F) – Supports optional 1000BASE-SX/LX mini-GBIC
modules for uplink or downlink connections.
To Next Page
Loading...
Need help?
General