Name: TRENDnet TEW-825DAP
Brand: TRENDnet
Rating: 4 (1 reviews)

To Next Page

To Previous Page

  



©Copyright2017TRENDnet.AllRightsReserved.  



TRENDnetUser’sGuide



TEW‐825DAP

14

3.EnteryourUsernameandPassword,selectyourpreferredlanguage,andthenclick



OperatingModes

Thissectionoutlinestheavailableoperatingmodesavailableontheaccesspoint.



1.Logintoyourmanagementpage(see“Accessthemanagementpage”onpage16).

2.ClickonSystemandOperationMode.



3.Selecttheoperatingmodetoapplyoneachwirelessband.

4.ClickonApplybuttonlocatedonthebottomtosavethesettings,andclickon

Save/Reloadbuttonlocatedonthetopleftsectiontoapplythesavedsettings.



 



 AccessPoint:Inthismode,thedevicecreatesawirelessnetworktoyourexisting

network.

 ClientBridge:Selectthismodetoallowtheaccesspointtheabilitytowireless

connecttoyourwirelessnetwork.Thisissimilartoawirelesslaptopormobile

deviceconnectingtoawirelessnetwork.

 WDSAccessPoint:Inthemode,theaccesspointconnectstootherWDSbridge

enabledevicesforbackbonecommunicationandprovideswirelessconnectionto

clients(STAs)atthesametime.

 WDSBridge:WhenthismodeisselectedtheaccesspointconnectsONLYtoother

WDSbridgeenableddevicesandlocalnetworks(theotherwirelessinterfaceand

Ethernetinterface)asawirelessbackbonebridge.

 WDSStation:ThewirelessinterfaceconnectstootherWDSbridgeenableddevices

forbackbonecommunicationandconnectstootherwirelessaccesspointsatthe

sametime.UsethismodetopairwiththenexthopaccesspointasaWDSnetwork

outlet.

Note:Pleasenotethatonlyonebridgecanbesetupon2.4GHzor5.0GHzband,but

notboth.

TRENDnet TEW-825DAP User Manual

Questions and Answers: