Trilithic Three - Page 43

41
Model Three - Operation Manual
EIA Number - Press the
FCN
FCN
0
key to switch to alphanumeric entry
mode, then enter the desired EIA number for the channel. When you
are satisfied with your entry, press the
F
1
F
1
(ENTER) key to store the
change.
Standard Number - Press the
FCN
FCN
0
key to switch to alphanumeric
entry mode, then enter the desired standard number for the channel.
Press the
F
1
F
1
(ENTER) key to store the change.
Channel Label - Press the
FCN
FCN
0
key to switch to alphanumeric entry
mode, then enter the desired label (up to five characters) for this
channel. Press the
F
1
F
1
(ENTER) key to store the channel label.
Active Status - Press the
F
1
F
1
key to switch between ENA (enabled)
and DIS (disabled). Enabling a channel adds it to the selected User
Channel Plan. Disabling a channel removes it from the User Plan.
Type - Use the
F
1
F
1
key to toggle between the channel types; TV,
SIGL or DIGI.
When using FCN to make an alphanumeric
entry, remember to press the
F
1
F
1
(ENTER) key
after you have made an entry to store the new
data (see Entering Alphanumeric Characters in
Chapter 3: Walkthrough, Identify Components,
Navigating Functions).
TV - Audio and Video carriers (parameters: Frequency (Video), Audio
Offset).
SIGL - Single Frequency Channels (parameters: Center Frequency,
Measure BW).
DIGI - Digital Channels (parameters: Center Frequency, Measure BW).
Frequency - Press the
FCN
FCN
0
key to switch to Numeric Entry mode and
enter the desired frequency (Video Frequency for TV type channels or
Center Frequency for DIGI and SIGL type channels). Once the desired
modification is made, press the
F
1
F
1
key to store the change.
The rest of the parameters in the edit list are
affected by which type of channel is selected.