Trimble R7/R8 GPS Receiver User Guide 149
Software Utilities 16
Trimble R8 Operation
Note – All radios in the network must be configured with the
same wireless setting.
3. Select the appropriate operating mode, depending on how you
intend to use the receiver, for example, Base with No Repeaters:
4. Select one of the following channel sharing configurations (base
modes only; not available for rover):
– Off. The carrier detect mode is off. The unit will ignore
other transmissions on your frequency and continue to
transmit data.
Note – It may be illegal in your country of use to set
channel sharing to Off. You may be subject to penalties or
fines based upon the specific licensing requirements for
your country of use. Please consult your radio license
documentation or licensing agency for operational
guidelines.
– Avoid Weak Signals.The carrier detect mode is on. The
radio will cease transmitting if it detects another radio
transmission on its frequency. It will resume transmission
when the channel is free of radio traffic.
To Next Page
Loading...
Need help?
General
