Trimble R7 User Manual

Trimble R7/R8 GPS Receiver User Guide 191
RTCM Output B
Trimble R7 and R8
0.2 Message Scheduling
Table B.2 describes the frequency at which messages are generated
when they are enabled in a base receiver
.
Table B.2 Message scheduling
Type Frequency
1Every second
3 The 10th second after the first measurement, then every 10 seconds after that
9-3 Every second
18 Every second
19 Every second
22 The 5th second after the first measurement, then every 10 seconds after that
23 The 4th second after the first measurement, then every 10 seconds after that
24 The 4th second after the first measurement, then every 10 seconds after that
59-sub, 13 The 5th second after the first measurement, then every 10 seconds after that
1004 Every second
1006 Every 10 seconds
1008 Every 10 seconds
1013 Every 300 seconds

Trimble R7 Specifications

General

Brand	Trimble
Model	R7
Category	GPS
Language	English