Trimble R7 User Manual

Trimble R7/R8 GPS Receiver User Guide 153
Specifications 17
Trimble R8 Operation
17.3 Positioning Specifications
Table 17.2 lists positioning specifications for the Trimble R8 receiver.
Table 17.2 Positioning specifications
Positioning Mode Horizontal accuracy
(RMS)
Vertical accuracy
(RMS)
RTK (OTF) Synchronized 1 cm + 1 ppm
(× baseline length)
2 cm + 1 ppm
(× baseline length)
Low Latency 2 cm + 2 ppm
(× baseline length)
a
a
Depends on radio link latency.
3 cm + 2 ppm
(× baseline length)
a
L1 C/A Code
Phase
Synchronized/
Low Latency
.25m + 1ppm RMS .50m + 1ppm RMS
Static/
FastStatic
N/A 5 mm + 0.5 ppm
(× baseline length)
5 mm + 1 ppm
(× baseline length)
WAAS N/A Less than 5 m
b
b
3D RMS values depend on WAAS system performance.
Less than 5 m
b

Trimble R7 Specifications

General

Brand	Trimble
Model	R7
Category	GPS
Language	English