Trimble R7 User Manual

7 Software Utilities
74 Trimble R7/R8 GPS Receiver User Guide
Trimble R7 Operation
70.1 Adding frequencies for the 450 MHz internal radio
If your receiver has the optional internal radio installed, you can use
WinFlash to add receiving frequencies to the default list.
To add radio receiving frequencies:
1. Start WinFlash.
The Device Configuration screen appears.
2. From the Device type list select Trimble R7 Receiver.
3. From the PC serial port field select the serial (COM) port on
the computer that the receiver is connected to.
4. Click
Next.
The Operation Selection screen appears. The Operations list
shows all of the supported operations for the selected device. A
description of the selected operation is shown in the Description
field.
5. Select Configure Radio and click
Next.

Trimble R7 Specifications

General

Brand	Trimble
Model	R7
Category	GPS
Language	English