EasyManua.ls Logo

Triple E COMMANDER - Water Pump; Water System Access; Water Pump Initial Start-Up

Default Icon
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12-4
12.1.4 WATER PUMPS
Before water can enter the various out-
lets in your motorhome it fl ow through a
water fi lter. This fi lter is located on the
water pump.
Check the water fi lter periodically and
clean or replace it at least annually to
assure a clean supply of water.
COMMANDER / EMBASSY
Fig. 12-4 WATER FILTER
12.1.6
WATER PUMP INITIAL START-UP
1. Make sure all drain valves are closed including
the water heater valve.
2. Turn water pump switch off.
3. Fill water tank.
4. Open faucets, both hot and cold.
5. Turn pump switch on.
6. Close each faucet (cold and hot) as soon as
water fl ows steadily.
7. Check to see that pump stops after all faucets
are closed.
8. Pump is now ready for automatic operation. It
will start whenever a faucet is opened.
12.1.5 WATER SYSTEM ACCESS
The water system compart-
ment is designed with a hole
in the bottom to provide
access to the compartment
for the water line. Route the
hoses through this hole and
close the compartment door
when at a campsite.
Fig. 12-5 ACCESS HOLE (COMMANDER ONLY)
Water Filter
Water Filter
Water Filter
Access Hole

Table of Contents

Related product manuals