Trocen AWC708C Plus - Page 70

AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
69
point.
Go Back Position
Current Position: laser head will stay at where task finished.
Current Origin: go back to Origin point after finishing work.
Zero Coord: laser head goes back to machine zero point since
all finished.
Count Mode
Count per work: it will be counted as once after all files cut.
Count per Light: it will be counted as once after laser optical
output one time.
Single of Array: it will be counted as once after the solid
graphics in the file is cut.
Feeding Mode
Feed after all work: feed once after all graphics in the file are
cut.
Feed after array line: feed once after cutting a line or column
of graphics.
Feeding Delay Mode
Delay after feeding: the period between finishing cutting and
feeding.
Delay before feeding: the period between feeding and
starting to cut.
Auto Origin
(Beyond border
limit)
Enable or disable the function.