Trocen AWC708C Plus - Axis Speed Parameters

AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
75
(mm/s)
frame of graphics.
Blow Open Delay(s)
The period between laser head optical output and air
blowing started.
Blow Close Delay(s)
The period between laser head optical output stopped and
air blowing stopped.
6.7.3 Axis Speed Parameters
On the Common Params Settings page, move cursor to【Axis Speed
Parameters】and press【Enter】. Press【↑】【↓】to move cursor and
press number keys to modify parameters, press【Enter】to save settings.
Fiugre6-7-7 Axis Speed Parameters Interface