Trocen AWC708C Plus - 6.7.4 Rotate Engraving & Cutting

AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
76
Table6-7-3 Axis Speed Parameters Instruction
Name
Instruction
Z Work Speed
(mm/s)
The work speed of Z axis.
U Work Speed
(mm/s)
The work speed of U axis.
V Work Speed
(mm/s)
The work speed of V axis.
W Work Speed
(mm/s)
The work speed of W axis.
XY Home Speed
(mm/s)
The reset speed of XY axis.
Z Home Speed
(mm/s)
The reset speed of Z axis.
U Home Speed
(mm/s)
The reset speed of U axis.
V Home Speed
(mm/s)
The reset speed of V axis.
W Home Speed
(mm/s)
The reset speed of W axis.