Trocen AWC708C Plus - 7.3 I;O Parameters

AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
92
Laser1 Water Protect
Water protection switch. If enable this function, the machine
will stop working when the machine detects the signal of
water stopping.
Laser2 Water Protect
Water protection switch. If enable this function, the machine
will stop working when the machine detects the signal of
water stopping.
Laser3 Water Protect
Water protection switch. If enable this function, the machine
will stop working when the machine detects the signal of
water stopping.
Laser4 Water Protect
Water protection switch. If enable this function, the machine
will stop working when the machine detects the signal of
water stopping.
7.3 I/O Parameters
On the Manufacture Params Settings page, move cursor to 【 IO
Parameters】and press【Enter】. Press【↑】【↓】to move cursor, press
【←】【→】to modify options and press【Enter】to save settings.
If want to use feed function, users should enable【Feed Switch】on this
page.