Fiugre6-7-5 Auto Origin
6.7.2 Common Parameters
On the Common Params Settings page, move cursor to 【 Common
Parameters】and press【Enter】. Press【↑】【↓】to move cursor and
press number keys to modify parameters, press【Enter】to save settings.
The【Z AutoFocus】function is mainly used to control the distance between
the laser head and the work table. If the Z axis is used as the lifting shaft
or platform lifting shaft, users can turn on the【Z AutoFocus】function on
the Function Config page (【Manufacturer Params Settings】→【Function
To Next Page
Loading...