68
Chapter 11: Electrical System Center Console Models • Owner’s Manual
Supplement
Connecting to Shore Power
1. Review all hazard information at the beginning of this section, Shore Power.
2. Turn Off the shore power master circuit breaker.
3. Attach the shore power cord to the boat inlet first, then to the dockside outlet.
4. Turn On the shore power master circuit breaker.
SHOCK and ELECTRICAL SYSTEM DAMAGE HAZARD!
• Monitor the polarity indicator lights EVERY TIME you connect to shore power.
• If a reversed polarity light turns On when you are connecting to shore power, do NOT turn
On the main breaker switches.
• Instead, IMMEDIATELY unplug the shore power cord (ALWAYS from the dockside outlet
first) and alert marina management.
WARNING!
!
SHORE POWER
INLET
BREAKER
SWITCH
POLARITY
LIGHTS
To Next Page
Loading...
