The control unit can print or download a table of the %Gmm vs. N
data. It can also print a graph and table for this data (see Figures 2-1
and 2-2). Note that the time and date in the header refers to the time
you printed the data. The time and date given above the sample data
in the tables refers to the time and date that the sample was
completed. The graph has a logarithmic x-axis. Select the output
type by pressing the number key that matches the desired format.
If the user selects the Print Table option, then the control unit
requests the output port (either the printer port or the serial port). To
send the data to the printer port, press 〈1〉. To send the data to the
serial port, press 〈2〉. The control unit outputs the table and returns
to the Output %Gmm screen.
If the user selects the Graph & Table option, then the control unit
prints the graph and table. After printing, the control unit returns to
the Output %Gmm screen.
The %Gmm vs. N graph includes three reference lines: Nini,
Ndesign, and Nmax. The default positions for the reference lines are
set by SUPERPAVE volumetric mix design properties at 89%Gmm,
96%Gmm, and 98%Gmm, respectively. To change the positions for
the reference lines, press 〈MENU〉. Select the Edit Specs option by
pressing 〈.〉 then 〈0〉. Follow the control unit prompts to enter the
new %Gmm positions.
To Next Page
Loading...
Need help?
General
