7-4
To activate a known project ID, press (2) at the Select
display. The oven displays:
↕ to scroll chars
YES to select char
ENTER when done
Enter a project ID using up to twelve alphanumeric
characters. Use the numeric keys to enter numbers and
move the cursor to the next position. To enter alphabetic
characters, use the arrow keys to scroll through the
characters. When the desired character is displayed,
press
(YES) to move the cursor to the next position. To
move the cursor back one position, press the
(BACK
SPACE
) key.
NOTE
After the last character has been entered, press (YES)
to accept the character before pressing (ENTER) to
accept the project ID.
When the project ID is complete, press (ENTER). If the project
ID entered is not valid, the oven displays Requested Project
not found and returns to the Project Menu. If the project ID
entered is valid, the oven sets the project as active, displays a
brief confirmation message, and returns to the Project Menu.
CREATE
To create and activate a new project, press (2) at the Project
Menu shown on page 7-3. The oven displays:
↕ to scroll chars
YES to select char
ENTER when done
Enter a project ID using up to twelve alphanumeric characters.
Use the numeric keys to enter numbers and move the cursor to
To Next Page
Loading...
Need help?
General
