TRUE ICE SERVICE MANUAL truemfg.com
TEC_TM_198 | REV. A | EN
P#857284
03/26/2024 Page 48 of 96
Maintenance & Cleaning
Maintenance & Cleaning
Recommended Maintenance Schedule
The maintenance schedule below is a guideline. More frequent maintenance may be required depending on water quality, environment,
and local sanitation regulations.
Recommended cleaning schedule
Recommended Maintenance Schedule
Frequency Component Task
Daily
Ice Scoop Clean with sanitizer or neutral cleaner and rinse thoroughly.
Monthly
Air Filter Inspect and wash with warm water and neutral cleaner if dirty.
Water Filter
• Check the "Water Filter Usage" counter in the "Counters"
section in the
"MENU" screen.
• Check for proper outlet pressure and change if less than 20 psig (138 kPa)
Ice Machine and Bin
Exterior (or dispenser, if
applicable)
• Wipe surfaces with a damp cloth rinsed in water to remove dust and dirt from the
outside of the ice machine and bin. For greasy residue use a damp cloth rinsed in a
mild dish soap and water solution. Wipe dry with clean, soft cloth.
• The exterior panels have a clear coating that is stain resistant and easy to clean.
Products containing abrasives will damage the coating and scratch the panels.
Quarterly Ice Machine Preventative Maintenance Descaling and Sanitizing Procedure.
Bi-Annually
Ice Machine and Bin (or
dispenser, if applicable)
Descaling and Sanitizing Procedure.
As Directed by Service
Professional
Air Cooled Condenser
In areas with airborne contaminates (i.e. grease), chemical cleaning of the condenser
will be required. This should only be done by a service professional. See "Condenser
Coil Cleaning" (pg. 57).
To Next Page
Loading...
Need help?
General
