True Ice Series User Manual

TRUE ICE SERVICE MANUAL truemfg.com
TEC_TM_198 | REV. A | EN
P#857284
03/26/2024 Page 78 of 96
Troubleshooting & Diagnosis
TrueZone™ (UV System)
Optional accessory.
Ozonated Air
to food zone
Air Inlet
from bin
CAN Connection
(Connects to Board)
12VDC Incoming
Voltage
UV bulb
LED status window
LED Indications:
Steady Blue - Ballast On and Operating correctly
Slow Flashing Red - Lamp low current
Fast Flashing Red - Lamp overload (high current)
Steady Red - Lamp time exceeded
Lamp Operating Time is reset when new bulb is detected
System Health:
Bit 0: 1 = Lamp has a valid serial number, 0 = No or invalid serial
number detected
Bit 1: 1 = Fault - lamp has low current (Ballast is on)
Bit 2: 1 = Fault - lamp overload (high current)
Bit 3: 1 = Fault - lamp time exceeded - lamp needs to be replaced
Bit 4: 1 = Ballast is on, 0 = Ballast off (high current, good SN
detected)
System Health Codes can ready by depressing the UV icon
located in the MENU

True Ice Series Specifications

General

Brand	True
Model	Ice Series
Category	Commercial Food Equipment
Language	English