TRUE ICE SERVICE MANUAL
TEC_TM_198 | REV. A | EN 03/26/2024 Page 51 of 96
truemfg.com
Maintenance & Cleaning (cont.)
Recommended Descaling and Sanitizing Procedures
There are three descale and sanitize cycles.
DANGER!
HIGHLY CORROSIVE CLEANING CHEMICALS.
AVOID CONTACT WITH EYES AND SKIN.
WEAR EYE PROTECTION AND RUBBER GLOVES WHEN HANDLING.
WARNING!
Toxic material hazard!
DO NOT MIX DESCALER WITH SANITIZER. Harmful fumes may be generated.
Optical radiation hazard! UV light!
Invisible laser radiation. Do not look directly at light. Always disconnect power before servicing the lamp.
USER ACTION!
TRUE recommends using TRUE Ice Machine Descaler. To purchase, contact TRUE Parts Department at 800-424-8783 or
PartsInquiries@TrueMFG.com.
If using a non-True descaler (Nickel-safe) recommended dilution for soaking parts is 3 fl oz (88.7 mL) per 1 gal (3.78 L) and
recommended amount for evaporator cleaning is 6-8 fl oz (177.4-236.6 mL).
Use of non-recommended descaler may void warranty.
Cycle Time
Preventative Maintenance 10 min
Standard 20 min
Heavy 30 min
To Next Page
Loading...
Need help?
General
