TSC Alpha-30L Series User Manual

- 11 -
Media type
Die cut, black mark, receipt, fan-fold, linerless, continuous (outside wound)
Media thickness
0.06 ~ 0.16 mm
Media width
25.4 ~80 mm with liner
50.8~112mm with liner
Media core diameter

12.7 mm (0.5"), standard

19.1 mm (0.75"), with 0.75" ID adaptor
Label length

12.7 ~ 2,794 mm (0.5” ~ 110”)

25.4 ~ 152.4 mm (1” ~ 6”) for peeler mode
Environment condition

Operation: -20 ~ 50˚C (-4 ~ 122˚F), 10~90% non-condensing

Storage: -30 ~ 70˚C (-22 ~ 158˚F), 10~90% non-condensing

Charging: 0 ~40˚C (32~ 104˚F), 10~90% non-condensing
Factory option

Media sensor position (default center, right, or left side)

Linerless kit
User option

Type C USB 2.0 cable

Protective case with shoulder strap

Shoulder strap

Li-ion smart battery

1-slot docking cradle

4-slot docking cradle

1-slot battery charger

4-slot battery charger

12-24VDC vehicle power adaptor

12-60VDC vehicle power adaptor

12-48VDC power source with
battery eliminator

Vehicle mount adapter can be
used with RAM® MOUNTS
1.3 Battery Information
Model
Capacity
Cycle life
Warning conditions
Charging
hours
Working hours
Alpha-30L
3030 mAh
500 times
GOOD: Discharged count <= 550
or absolute battery capacity >=
70%.
REPLACE: 550 < Discharged count
<= 600 or 67% =< absolute
battery capacity < 70%.
UNUSABLE: 600 < Discharged
count or absolute battery
capacity < 67%.
3.5~5 hrs
23.5 hrs
- 12.5% printing ratio
- 1 label per two minutes
- Bluetooth
Alpha-40L
6200 mAh
500 times
4.5 ~ 6.5
hrs
45 hrs
- 12.5% printing ratio
- 1 label per two minutes
- Bluetooth

TSC Alpha-30L Series Specifications

General

Brand	TSC
Model	Alpha-30L Series
Category	Barcode Reader
Language	English