TSC Alpha-30L Series User Manual

- 43 -
4.3 Setting
This “Setting” category can set up the printer settings for TSPL & ZPL2. Press right soft key to switch the
TSPL & the ZPL2.
4.3.1 TSPL
Item
Description
Default
Speed
Use this item to setup print speed. The each increase or decrease is 0.5
ips. Available setting is from 1 to 6.
3 ips
Density
Use this option to setup printing darkness. The available setting is from 0
to 15, and the step is 1. You may need to adjust your density based on
selected media.
8
Direction
The direction setting value is either 1 or 0. Use this item to setup the
printout direction.
DIRECTION 0
DIRECTION 1
0
Command Set - TSPL
Speed
Density
Direction
Print Mode
Batch Mode
None
Peeler Mode
Offset
Shift X/Y
Reference X/Y
Code Page
Country
FEED

TSC Alpha-30L Series Specifications

General

Brand	TSC
Model	Alpha-30L Series
Category	Barcode Reader
Language	English