- 19 -
3.2 Charging the Smart Battery
Smart Battery Charging Mode and Operation Instructions
In order to battery storage safety and increase battery storage time, the battery will be in shutdown mode for storage and
shipping. The smart battery is charged for the first time, it needs to unlock this shutdown mode.
For charging via printer:
No steps are required.
For 1-bay or 4-bay battery charger charging:
The LED indicator on the charger will flash red when the battery is charged for the first time. Please remove the smart
battery and reinstall it to unlock this shutdown mode.
Charging Temperature
The battery normal working condition is from 0°C to 40°C (32 °F to 104 °F). The device or battery
charger always perform battery charging in a safe and optimummanner. At higher temperatures (e.g.
approximately +40 °C (+104 °F) or charging when turning on the printers), the printer or battery
charger may stop charging for a period of time to keep the battery at acceptable temperatures.
To Next Page
Loading...
Need help?
General
