TSC TTP-244 Pro Series User Manual

- 13 -
2.3 LED Indicators and Buttons
2.3.1 LED Indication
2.3.2 Buttons
LEDs
Indication
PWR. (POWER) Indicator
The green PWR. indicator illuminates when the
POWER switch is turned on.
ON-LINE Indicator
The green ON-LINE indicator illuminates when the
printer is ready to print. When PAUSE button is
pressed, the ON-LINE indicator flashes.
ERR. Indicator
(Error/Paper Empty)
The red ERR. indicator illuminates in the event of a
printer error, such as memory error, syntax error, and
so forth. For a full list of error messages, please refer
to section 6, Troubleshooting Guides.
Buttons
Function
PAUSE Button
The PAUSE button allows the user to stop a print job
and then continue the printing with a second
depression of the button. By pressing the PAUSE
button: (1) the printer stops printing after the printing
label, (2) the PAUSE LED flashes, and (3) the printer
will hold all data in memory. This allows for trouble-
free replacement of label stock and thermal transfer
ribbon. A second depression of the PAUSE button will
restart the printer.
Note: If the PAUSE button is held down for more than 3
seconds, the printer will be reset and all data of
the previous printing job will be lost.
FEED Button
Press the FEED button to feed the label to the top of form
of the next label.

TSC TTP-244 Pro Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
Processor	32-bit RISC CPU
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0
Label Width	1 inch to 4.49 inches
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)
Power Supply	External universal switching power supply
Operating Temperature	5 ~ 40°C (41 ~ 104°F)
Storage Temperature	-40°C to 60°C
Operating Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)