TSC TTP-244 Pro Series User Manual

- 18 -
5. Please be noted that the bigger hub
side with 4 ribs must be installed toward
the right side of ribbon mechanism.
6. Disengage the printer carriage by
pulling the carriage release lever
upwards.
7. Following the direction of the  RIBBON
label, pull the transparent ribbon leader
to the front from under the ribbon
mechanism.
8. Attach the ribbon leader to the empty
paper core on the ribbon rewind spindle
(with a tape).

TSC TTP-244 Pro Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
Processor	32-bit RISC CPU
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0
Label Width	1 inch to 4.49 inches
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)
Power Supply	External universal switching power supply
Operating Temperature	5 ~ 40°C (41 ~ 104°F)
Storage Temperature	-40°C to 60°C
Operating Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)