To Next Page

To Previous Page

Setup and System Commands

 SIZE

Description

This command defines the label width and length.

Syntax

English system (inch)

SIZE m,n

Metric system (mm)

SIZE m mm,n mm

Dot measurement

SIZE m dot,n dot

This command is only supported in v6.27 and later firmware.

Parameter Description

m Label width (inch or mm)

n Label length (inch or mm)

Note :

200 DPI : 1 mm = 8 dots

300 DPI : 1mm = 12 dots

For metric and dot systems, there must be a space between parameter and

“mm” or “dot”.

Max. width

72mm

104mm

106mm

108mm

219.5mm

TTP-243 series

TTP-243 Plus series

TTP-244ME series

TTP-244ME Plus series

TTP-244 series

TTP-244CE series

TTP-245 series

TTP-245C series

TDP-245 series

TTP-246M series

TTP-248M series

TTP-2410M series

TDP-643 Plus series

TDP-643R Plus series

TTP-342 series

TTP-342 Plus series

TTP-342M series

TTP-342M Plus series

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-244CE series and is the answer not in the manual?

TSC TTP-244CE series Specifications

General

Resolution	203 dpi
Processor	32-bit RISC CPU
Print Method	Thermal Transfer / Direct Thermal
Max Print Speed	4 inches per second
Memory	8 MB SDRAM, 4 MB Flash
Communication Interfaces	USB, Serial (RS-232)
Media Handling	Continuous, Fan-Fold
Media Type	Continuous, Die-cut, Black Mark, Fan-fold
Media Width	1 inch to 4.4 inches
Media Roll Diameter	127 mm (5 inches)
Ribbon Length	300 m
Ribbon Core	25.4 mm (1 inch)
Power	100-240 VAC, 50/60 Hz
Weight	2.5 kg
Max Print Length	2, 286 mm (90")
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D) 9.13" (W) x 6.14" (H) x 11.34" (D)