TSC TTP-244CE series User Manual

TSC AUTO ID Technology Co., Ltd. IV Copyright 2009 All Rights Reserved.
Document Conventions
This manual uses the following typographic conventions.
Convention Description
[expression list] Items inside square brackets are optional, expression
maximum length 2*1024 bytes;
<ESC> ESCAPE (ASCII 27), control code of status
polling command returns the printer status
immediately.
~ (ASCII 126), control code of status polling
command, returns the printer status only when
the printer is ready.
Space (ASCII 32) characters will be ignored in the
command line.
“ (ASCII 34), beginning and ending of expression
CR,LF (ASCII 13),(ASCII 10) denotes end of command line.
NULL (ASCII 0) supported in the expression, except the
2D bar code commands.
Note: 203 DPI: 1 mm = 8 dots Arial font in bold and italic type is used for note.

TSC TTP-244CE series Specifications

General

Resolution	203 dpi
Processor	32-bit RISC CPU
Print Method	Thermal Transfer / Direct Thermal
Max Print Speed	4 inches per second
Memory	8 MB SDRAM, 4 MB Flash
Communication Interfaces	USB, Serial (RS-232)
Media Handling	Continuous, Fan-Fold
Media Type	Continuous, Die-cut, Black Mark, Fan-fold
Media Width	1 inch to 4.4 inches
Media Roll Diameter	127 mm (5 inches)
Ribbon Length	300 m
Ribbon Core	25.4 mm (1 inch)
Power	100-240 VAC, 50/60 Hz
Weight	2.5 kg
Max Print Length	2, 286 mm (90")
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D) 9.13" (W) x 6.14" (H) x 11.34" (D)