TSC TTP-244CE series User Manual

TSC AUTO ID Technology Co., Ltd. 162 Copyright 2009 All Rights Reserved.
 SET RIBBON
Description
This setting is used to enable/disable ribbon sensor detection. (Thermal Transfer
Printing/Thermal Direct Printing) Printer will detect the presence of a ribbon to determine
using either direct thermal or thermal transfer printing upon printer startup. This setting will
NOT be saved in printer memory.
Syntax
SET RIBBON ON /OFF
Parameter Description
ON Thermal transfer printing
OFF Thermal direct printing
Example
REM ***Direct printing****
SIZE 4,4
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 0
REFERENCE 0,0
SET CUTTER OFF
SET PEEL OFF
SET RIBBON OFF
CLS
BARCODE 100,100,"39",48,1,0,2,5,"CODE 39"
PRINT 1

TSC TTP-244CE series Specifications

General

Resolution	203 dpi
Processor	32-bit RISC CPU
Print Method	Thermal Transfer / Direct Thermal
Max Print Speed	4 inches per second
Memory	8 MB SDRAM, 4 MB Flash
Communication Interfaces	USB, Serial (RS-232)
Media Handling	Continuous, Fan-Fold
Media Type	Continuous, Die-cut, Black Mark, Fan-fold
Media Width	1 inch to 4.4 inches
Media Roll Diameter	127 mm (5 inches)
Ribbon Length	300 m
Ribbon Core	25.4 mm (1 inch)
Power	100-240 VAC, 50/60 Hz
Weight	2.5 kg
Max Print Length	2, 286 mm (90")
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D) 9.13" (W) x 6.14" (H) x 11.34" (D)