TSC TTP-244CE series User Manual

TSC AUTO ID Technology Co., Ltd. 35 Copyright 2009 All Rights Reserved.
 BARCODE
Description
This command prints 1D barcodes. The available bar codes are listed below:
 Code 128 (switching code subset automatically)
 Code 128M (switching code subset manually)
 EAN 128 (switching code subset automatically)
 Interleaved 2 of 5
 Interleaved 2 of 5 with check digit
 Code 39 standard
 Code 39 full ASCII
 Code 39 full ASCII with check digit
 Code 93
 EAN 13
 EAN 13 with 2 digits add-on
 EAN 13 with 5 digits add-on
 EAN 8
 EAN 8 with 2 digits add-on
 EAN 8 with 5 digits add-on
 Codabar
 Postnet
 UPC-A
 UPC-A with 2 digits add-on
 UPC-A with 5 digits add-on
 UPC-E
 UPC-E with 2 digits add-on
 UPC-E with 5 digits add-on
 MSI
 PLESSEY
 China POST
 ITF14
 EAN14
 CODE 11

TSC TTP-244CE series Specifications

General

Resolution	203 dpi
Processor	32-bit RISC CPU
Print Method	Thermal Transfer / Direct Thermal
Max Print Speed	4 inches per second
Memory	8 MB SDRAM, 4 MB Flash
Communication Interfaces	USB, Serial (RS-232)
Media Handling	Continuous, Fan-Fold
Media Type	Continuous, Die-cut, Black Mark, Fan-fold
Media Width	1 inch to 4.4 inches
Media Roll Diameter	127 mm (5 inches)
Ribbon Length	300 m
Ribbon Core	25.4 mm (1 inch)
Power	100-240 VAC, 50/60 Hz
Weight	2.5 kg
Max Print Length	2, 286 mm (90")
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D) 9.13" (W) x 6.14" (H) x 11.34" (D)