TSC TTP-244CE series User Manual

TSC AUTO ID Technology Co., Ltd. 125 Copyright 2009 All Rights Reserved.
 GETKEY( )
Description
This command is used to get the status of the PAUSE and FEED keys. This command waits
until either key is pressed, whereupon 0 is returned if PAUSE key is pressed and 1 is returned
if FEED key is pressed.
Syntax
GETKEY()
Model
PAUSE
FEED
TTP-2410M/TTP-346M Plus/TTP-248M/
TTP-246M Plus/TTP-344M Plus/TTP-384M
/TTP-644M
TTP246M/344M/
TTP-244/TTP-244 Plus
TTP-243/TTP-342
TTP-243 PLUS/TTP-342 PLUS
TTP-342M/TTP-244ME
TTP-342M PLUS/TTP-244ME PLUS
0
1
TDP-643 PLUS
TDP-643R PLUS
TTP-245/343/TDP-245
TTP-245C/343C/244CE
X
1
Example
DOWNLOAD "DEMO4.BAS"
SIZE 4,4
GAP 0,0
CLS
:START
A=GETKEY()
IF A=0 THEN GOTO PAUSEB
IF A=1 THEN GOTO FEEDB
:PAUSEB
CLS
TEXT 50,10,"4",0,1,1,"PAUSE key is pressed !"
PRINT 1
GOTO START
:FEEDB
CLS
TEXT 50,10,"4",0,1,1,"FEED key is pressed !"
PRINT 1
EOP

TSC TTP-244CE series Specifications

General

Resolution	203 dpi
Processor	32-bit RISC CPU
Print Method	Thermal Transfer / Direct Thermal
Max Print Speed	4 inches per second
Memory	8 MB SDRAM, 4 MB Flash
Communication Interfaces	USB, Serial (RS-232)
Media Handling	Continuous, Fan-Fold
Media Type	Continuous, Die-cut, Black Mark, Fan-fold
Media Width	1 inch to 4.4 inches
Media Roll Diameter	127 mm (5 inches)
Ribbon Length	300 m
Ribbon Core	25.4 mm (1 inch)
Power	100-240 VAC, 50/60 Hz
Weight	2.5 kg
Max Print Length	2, 286 mm (90")
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D) 9.13" (W) x 6.14" (H) x 11.34" (D)