TSC TTP-244CE series User Manual

Update History
Date
Content
Editor
2007/7/13
Revise some typos
Phil
2007/12/25
Revise FREAD$() example
Camille
2008/4/10
Add update history list
Camille
2009/1/17
Add GAPDETECT command.
Ken
2009/5/18
Add CIRCLE command
Phil
2009/6/24
Add RSS command
Phil
2010/7/6
Revise bar command section
Camille
2010/10/25
Revise some sections
Camille
2011/01/06
Add CODE 11 barcode
Ernest
2011/01/06
Add AZTEC barcode
Ernest
2011/01/06
Revise sensor intension table in SET GAP
Ernest
2011/01/10
Add BLINEDETECT command
Ernest
2011/01/10
Add AUTODETECT command
Ernest
2011/01/10
Add BASIC function FORMAT$()
Ernest
2011/01/10
Add BASIC function NOW$()
Ernest
2011/01/10
Add BASIC function TRIM$()
Ernest
2011/01/10
Add BASIC function LTRIM$()
Ernest
2011/01/10
Add BASIC function RTRIM$()
Ernest
2010/01/10
Add BASIC function STRCOMP()
Ernest
2010/01/10
Add BASIC function INSTR()
Ernest
2011/01/25
Modify TSC address
Camille
2011/03/04
Revise, TTP-248M doesn't support mirror function
Ernest
2011/03/04
Add sensor range of TTP-225/ TDP-225 in command SET GAP
Ernest
2011/12/09
Add some command spec in RSS.
Ernest

TSC TTP-244CE series Specifications

General

Resolution	203 dpi
Processor	32-bit RISC CPU
Print Method	Thermal Transfer / Direct Thermal
Max Print Speed	4 inches per second
Memory	8 MB SDRAM, 4 MB Flash
Communication Interfaces	USB, Serial (RS-232)
Media Handling	Continuous, Fan-Fold
Media Type	Continuous, Die-cut, Black Mark, Fan-fold
Media Width	1 inch to 4.4 inches
Media Roll Diameter	127 mm (5 inches)
Ribbon Length	300 m
Ribbon Core	25.4 mm (1 inch)
Power	100-240 VAC, 50/60 Hz
Weight	2.5 kg
Max Print Length	2, 286 mm (90")
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D) 9.13" (W) x 6.14" (H) x 11.34" (D)