TSI Instruments DustTrak 8520 - Page 37

Operation
27
The following table summarizes the information displayed in the
D
USTTRAK Logging Protocols dialog box:
Serial Number
Displays the serial number of the logging
instrument.
Number of tests
logged
Displays the number of tests currently logged
and stored in the logging instrument.
Available
Memory (%)
Displays the percent of available memory in
the logging instrument.
LOG 2 and LOG 3 Mode Protocols
Channels
Displays the channels selected for sampling in
LOG 2 and LOG 3 modes.
Start Date
Displays the start date for LOG 2 and LOG 3
modes.
Start Time
Displays the start time for LOG 2 and LOG 3
modes.
Log interval
Displays the log interval for LOG 2 and LOG
3 modes.
Test length
Displays the test length for LOG 2 and LOG 3
modes.
Number of tests
Displays the number of tests for LOG 2 and
LOG 3 modes.
Time between
tests
Displays the time between tests for LOG 2
and LOG 3 modes.
Percent
memory
required.
Displays the percent of logger memory
required to perform a LOG 2 or a LOG 3
mode sample. To store the results of a LOG 2
or LOG 3 mode sample, the Available
Memory must be equal to or greater than the
Percent memory required.