INFO MODE
13
Overview of the Info Mode
The Info Mode serves four main purposes:
1. To display oven information.
2. To provide access to Test Mode and additional
diagnostic tools for service technicians.
3. To turn oven options and features on/off.
4. To update oven settings.
To access the Info Mode, simply press the Info key
when the oven is either off or cooling down. To toggle
between screens 1 and 2, press the Up or Down key.
From screen 1 of the Info Mode (Figure 15):
- View the oven serial number
- View the oven software version
- View the menu part number and revision
- View the last temperature selected to cook
- View the electrical compartment temperature
- Scroll through counters (total cook time, magne-
tron time, total oven on time, and cumulative
cook count)
- View the operating voltage (North America
models only)
- Access the fault log
- Access service phone numbers
From screen 2 of the Info Mode (Figure 16):
- Access Test Mode
- Access the “Options” screen
- Set the language (not available on all models)
- Set the date/time
- Increase/decrease the tone volume (sound)
- Access the “Load Menu” screen
- Turn the F2 Alarm on or off (page 14 for details)
Viewing Cook Counter/Time Logs
From the Info Mode (Figure 15), press the R1
soft key:
- Once to display total cook time.
- Twice to display total magnetron time.
- Three times to display total “oven on” time.
- Four times to display a cumulative cook count.
Viewing the Fault Log
Figures 17-18. For more information on faults,
see pages 35-36. To zero the fault counters, select
Clear All.
From the Info Mode (Figure 15), press the R3 soft
key to view the fault log (Figure 17). To view time
stamps of each fault occurrence (Figure 18), press the
soft key adjacent to the fault code.
To Next Page
Loading...
Need help?
General
