TurboChef Sota

74 TROUBLESHOOTING
YES
YES
YES
NO
YES
Troubleshooting:
Menu will not Load - USB
Does the oven detect
the USB when it is
inserted into the oven?
Does the “Load Menu”
option appear?
Verify the Load Menu
option is set to “Yes”
from the Options screen
(page 25).
Verify that the file
is either a binary
file (.bin) or a
Chefcomm file
(.xtm). Verify that
the menu file is
stored on the root
of the USB (i.e.,
not inside any
folders). Does the
problem persist?
Verify that the USB contains 8GB
or less of storage space. If it is larger
than 8GB, try a different USB.
Does the problem persist?
Verify that the menu is the correct type
for this oven. If necessary, obtain a new
menu file from TurboChef. Does the
problem persist?
After selecting the “Load
Menu” option, is there a
MicroSD error message?
Replace the USB/
smart card reader
and connectors.
Does the problem
persist?
Replace the USB/smart
card reader and connec-
tors. Does the problem
persist?
Replace the display.
Verify the oven is Off
or Cooling Down - the
USB will not be detect-
ed if the oven is in any
other mode. Does the
problem persist?
YES
YES
YES
NO
NO
YES
YES
On a computer, copy and paste the files from
the USB into another directory. Next, format
the USB drive on your computer, specifying the
FAT-32 file system. After the USB has been for-
matted, copy the files back onto it and try the
menu load again. Does the problem persist?
YES
Verify the MicroSD
card is inserted properly
and has not popped out.
Update the oven firm-
ware.