TurboChef Sota

68 TROUBLESHOOTING
Troubleshooting:
Menu Settings are Not Present
NO
Try loading a menu from a
new smart card, ensuring the
smart card is the correct type
(gray for SBK ovens and white
for SOTA ovens). Was the
load successful?
Replace the card
reader and/or cable.
Ensure the cable
connecting the reader to
the I/O Control Board
(SAGE) is securely
attached and not dam-
aged.
YES
NO
Is the connection from
smart card reader to
the I/O Control Board
(SAGE) OK?
NO
Perform a firmware
update, following the
instructions on page 17,
then load the menu card
again. Was the menu
load successful?