Page 56 of 58 Pages
Solution
10.1 Make sure the door is tightened enough.
Replace the door gasket.
(see para. 10.3 Replacing the Door Gasket)
11.1 If you are running a ‘liquids’ program this is normal.
(see, PROGRAM 5)
12.1 Clean strainer according to instructions.
If the above recommendations did not correct the malfuncti
on, or if any problems not discussed in this section were encountered,
please contact your dealer or point of purchase for further assistance.
Problem
10. Steam leaks at the machine’s door
11. When running a cycle, the exhaust
stage takes a very long time.
12. Water does not exit chamber due to
clogged outlet strainer.
BASKETS AND CONTAINERS
To Next Page
Loading...
