Preface
x iSTAR Ultra Installation and Configuration Guide
How to Use this Manual
This manual contains the following information:
Chapter/Appendix Title Description
Chapter 1 Introducing the iSTAR Ultra Provides basic information about iSTAR Ultra, and includes
an overview of iSTAR Ultra hardware and features.
Chapter 2 Site Requirements Provides physical requirements for iSTAR Ultra
configuration.
Chapter 3 iSTAR Ultra Topology Provides the information that you need to set up
iSTAR Ultra controllers for network communications.
Chapter 4 Power and Backup Provides details of iSTAR Ultra Power and Backup.
Chapter 5 iSTAR Ultra GCM Controls and
Indicators
Describes the LEDs, connectors, indicators, wiring details for
the GCM.
Chapter 6 iSTAR Ultra ACM Controls and
Indicators
Describes the LEDs, connectors, indicators, wiring details for
readers, I/O modules, Aux ports, wet and dry relay outputs,
inputs, alarm inputs, and FAI for the ACM.
Chapter 7 Using the iSTAR Configuration
Utility (ICU)
Provides instructions for configuring iSTAR Ultra controllers
using the iSTAR Configuration Utility (ICU).
Chapter 8 iSTAR Ultra Web Page
Diagnostic Utility
Describes how to monitor controllers and observe controller
diagnostics.
Chapter 9 Maintenance and Diagnostics
(LCD diagnostics and tests)
Describes how to monitor controllers and run controller
diagnostics.
To Next Page
Loading...
