Pre-Installation Planning and Requirements
2–4 iSTAR Ultra Installation and Configuration Guide
Environmental Requirements
Table 2-3 on page 2-4 lists the iSTAR Ultra environmental requirements.
Sleeve Anchor (screw and nut
included)
1/4-20 x 1-3/8 inch 4
Wedge Anchor (screw and nut
included)
1/4-20 x 1-3/8 inch 4
Machine Screw
Anchor
Machine screw 10-24 x 1 inch 6 X# 10, 4 x 1/4
Lag Shield
Anchor
Lag screws 1/4 x 1 inch 6
Table 2-2: Wall Mount Hardware Recommendations, continued
Screw Size (Minimum)
Anchor Type
Screw Type
(Pan Head)
Wood Studs,
Plywood Wall
Drywall Plaster
Board
Concrete,
Brick, or Block
Wall
Minimum
Number of
Screws
Table 2-3: Environmental Requirements
Status Range
Operation 32° F (0° C) to 122° F (50° C)
Storage 4° F (-20° C) to 158° F (70° C)
To Next Page
Loading...
