Installation
2–10 iSTAR Ultra Installation and Configuration Guide
Grounding Requirements
Grounding requirements are as follows:
Grounding needs to follow NEC Codes or the applicable Local codes.
Ensure that the iSTAR Ultra controller is properly connected to an earth ground at any of
the ground studs.
Ensure that the shield wires are grounded at one end of the cable to the nearest earth/
ground connection. Ground shields of both the GCM and ACMs.
When disconnecting wiring, disconnect ground wires last (to provide maximum
protection to the equipment and personnel).
Disconnect all sourced power before modifying the wiring.
To Next Page
Loading...
