EasyManua.ls Logo

Tyco iSTAR Ultra - Page 125

Tyco iSTAR Ultra
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web Page Diagnostics
iSTAR Ultra Installation and Configuration Guide 9–7
Figure 9-5: IP-ACM Configuration/Status Web Page
3. Click Save. Saved settings do not take effect until the system is rebooted. Click Reboot for
changes to take effect.
Table 9-2: IP-ACM Configuration/Status Web Page Fields
Field/Button Description
Configuration
Alloc Type The type of network connection used, DHCP or Static.
IP-ACM IP Addr The IP address of the IP-ACM.
IP-ACM Netmask The netmask.
IP-ACM Gateway The gateway address.
IP-ACM DNS The IP address of the domain name server.
iSTAR IP Addr The IP Address of the iSTAR to which the IP-ACM is
configured.
NOTE: This field will be 0.0.0.0 if the IP-ACM is not configured
in an iSTAR.
Save Saves the settings, but does not apply them until you click
Reboot.
Reboot Click to apply the changes.
NOTE: If you changed the IP address, the IP address may
change after you click Reboot.
Status (Read-Only)
Includes the above configuration information in addition to the following:

Table of Contents

Related product manuals